Nuestra Tienda

ARRMA 1/10 Vorteks Mega Brushed RTR
20 febrero, 2017
ECX 1/36 BeatBox 2WD Monster Truck RTR
20 febrero, 2017

Associated 1/10 SC10 Pro Comp RTR

$ 9,600.00

This is the electric powered, radio controlled, 1/10 scale, ready to run
SC10 Short Course Race Truck with the Pro Comp Body Trim from Associated.

**This version includes a Reedy Wolfpack battery and Charger.**


Chassis: Molded composite low CG design with side nerf bars,
hinged battery hold down strap fits NiMH and LiPo battery packs
Drive: Rear wheel with steel rear dogbone drive shafts
Motor: Associated Reedy Radon 17 turn
Radio: Associated XP2G 2.4GHz 2-channel pistol grip with DS1903
metal gear steering servo, transmitter does not have charge jack
ESC: Associated XP SC200 forward/reverse with LiPo low voltage cut-
off and reverse lockout
Shocks: Oil-filled with blue aluminum bodies
Battery: Reedy Wolfpack 7.2V 3000mAh NiMH with Deans connector and
Tamiya to Deans adapter
Battery Charger: 110V wall type
Body: 0.040″ (1mm) thick painted and trimmed with SC10 Team AE trim
Differential: Sealed, planetary gear
Spur Gear: 87 tooth
Slipper Clutch: Dual sided, externally adjustable
Wheels: KMC style, 3″ (76mm) diameter, 1.6″ (41mm) wide, black in
Tires: Multi terrain scale with reinforced sidewalls, 4.25″ (108mm)
diameter, 1.7″ (43mm) wide
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Bumpers: Front and rear with functional rear rubber mud flaps
Ball Bearings: 14 rubber sealed
Suspension: Fully adjustable with steel turnbuckles
Steering: Angled bellcrank “coplanar” steering with integral servo


SC10 Short Course Race Truck Kit from Associated with tires, wheels,
painted body, motor, radio, instruction manual, NiMH battery,
battery charger


Transmitter Batteries: Six AA-size
Building and track equipment


Length: 21.6″ (550mm)
Width: 11.5″ (293mm)
Track: 9.6″ (245mm)
Weight: 4.6lbs (2080g)
Wheelbase: 12.9″ (327mm)
Internal Gear Ratio: 2.6:1
Length 21.6″ (550mm)
Width 11.5″ (293mm) at front fenders, widest point
8.8″ (224mm) at center section, narrowest point
Height: 6″ (153mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 6x10mm Transmission 1 DTXC1561
2 3/16 x 3/8″ Transmission 1 DTXC1423
2 3/16 x 3/8″ Idler Gear 1 DTXC1423
4 3/16 x 3/8″ Rear Hubs 2 DTXC1423
4 3/16 x 3/8″ Front Hubs 2 DTXC1423


SKU: ASCC7028 Categoría: Etiquetas: ,