Nuestra Tienda

Dubro Kwik-Klip III Glow Plug Starter w/Charger
26 abril, 2017
Duratrax Onyx 245 AC/DC Dual Balancing Charger
26 abril, 2017

Duratrax Onyx 200 AC/DC Peak Charger

$ 990.00

This is the DuraTrax Onyx 200 AC/DC Sport Peak Charger with LEDs.
Designed for sport electric car or boat modelers
that use NiCd or NiMH batteries.


Charges 4-7 cell NiCd or NiMH (4.8 – 8.4V) cells with a capacity
range of 750 – 7500mAh
Compatible with AAA size cells up to the highest capacity sub-C cells
as well as 4-5 cell nitro receiver packs
AC and DC input capabilities make it perfect for indoor or outdoor
Pushbutton control and five LED indicators (4 Red, 1 Green), audible
tones and built-in leads for simplicity and convenience
Precise peak detection algorithm with automatic TRICKLE charge fills
packs completely for optimum voltage and run time
Built-in jack included for charging 4 or 5 cell NiCd or NiMH receiver
batteries for nitro models, or for monitoring charge voltage
of battery connected to the main output with a separate digital
Audible tones and multiple LEDs for simple setup and use
Lightweight switching AC power supply delivers up to 5 amps of charge
Solid state reverse polarity and current overload safety devices
ensure trouble-free operation and long duration
FIVE YEAR warranty (U.S.A. and Canada only)


DuraTrax Onyx 200 AC/DC Sport Peak Charger, DC power lead with
alligator clips


AC Input: 110V AC 60Hz
DC Input: 11-15V DC, built-in lead with alligator clips
Battery Types: 4-7 NiCd or NiMH cells (4.8-8.4V)
Battery Capacity Range: 750-7500mAh
Fast Charge Current: 1.5A, 3.0A, 5.0A linear (40W max.)
Fast Charge Termination: Peak detection
Fast Charge Safety Timer: 90 minutes
Peak Sensitivity: 8mV
Auto TRICKLE Current: 1/20 fast charge setting
Controls: Pushbutton, slide switch
LED Indicators: 4 Red, 1 Green
Audible Indicator: Indicate start, stop, errors
*Output Connections: Built-in lead with Kyosho type connector
Built-in jack for charging 4 or 5 cell Rx packs
*Standard to Deans Ultra Male Adapter available
separately (GPMM3131)
*Standard to Vendetta, MiniQuake, RS4 Battery available
separately (DTXC2210)
Protective Devices: Solid-state reverse polarity and current overload
Case Size: 5.74 x 4.60 x 1.61″ (146 x 117 x 41mm)
Weight: 17oz (484g)


SKU: DTXP4200 Categoría: Etiqueta: