This is the 72MHz Futaba 12ZHP Computer Radio on Mode 2 with the R5114DPS Synthesized 14-Channel Receiver.
Does not include servos.
This is the helicopter version which will default to helicopter settings when powered up and does not have a ratcheted throttle stick.
If your transmitter’s region code is something other than the United States, the TM-14 Module sold in the United States is not compatible with this transmitter. As such, it is necessary to purchase the TM-14 module which matches the region code of the transmitter.
The Futaba 12ZHP shares many features with the 14MZ such as Dual Internal Processors, Real-Time Response with 2048PCM,
Fully Synthesized Receiver that operates in either Mode A (standard Mode) or Mode B (new Mode), Servo Grouping, Variable Dual Rates and Quad-Bearing Gimbals
**** While you can obtain a 50MHz module for this radio, it can only be ****
******* Purchased through the service center at 217-398-8970 opt 2 *******
Dial-N-Key jog dial with joy stick button allows cursor movement in four directions for very user friendly programming
PCM G3 2048 resolution is “backwards compatible” with 1024 PCM, and FM/PPM
10 free (user programmable) mixes
24 preset model types, 8 heli swash types and 16 model types for fixed wing aircraft
Supports eight flight conditions (7 plus the default)
Stores memory for up to twenty five models
245 model memory available with optional 32MB Compact Flash Card available separately
Dual Internal Processors allow one processor to be devoted to flying functions while the other processor focuses on non-flight
functions such as input and communications
7.4V 2200mAh Lithium Ion transmitter battery (FUTM1475) for long operating times. Six factory-set Variable Dual Rate (VDR) curves can be assigned to any function in any flight condition configuration. Variable Dual Rates (VDR) and Expo can be combined so they are automatically activated when a function is activated, no program mixing required R5114DPS Receiver;
Operates in either Mode A (standard Mode) or if flying a model
that generates a lot of RF interference or if flying in an area
where interference may occur Mode B (new Mode) may be selected.
By using state-of-the-art Ball Grid Array (BGA) layered PC board technology, the 12ZHPs R5114DPS 14-channel synthesized receiver is the world’s smallest. All pilots will appreciate how easy its WFSS (Wireless Frequency Setting System) makes changing frequencies at busy airfields. It can be done right from the transmitter without changing crystals.
Multiple servos controlling a single function can be set up
through the transmitter and then plugged into differently
adjustable receiver channels (even non-consecutively) without
needing a separate servo synchronizer for mixing.
7.4V 2200mAh Lithium Ion transmitter battery (FUTM1475) for long operating times
Quad-Bearing Gimbals for smoothest motion and response, stick tensión and detent are adjustable
Seven color LED indicator
One year limited warranty
12ZHP Synthesized Transmitter (not available separately)
72MHz MZ-FM Module (only available through Futaba Service Center)
R5114DPS 72MHz Receiver (FUTL7708)
FLT2F2200 7.4V 2200mAh Lithium Ion Transmitter Battery (FUTM1475)
LBC-1D5 Lithium Ion Transmitter Battery Charger (FUTM1700)
NR4F NiCd 1500mAh Receiver Battery (FUTM1285)
FBC-32B Wall Charger for Receiver Battery (FUTM1705)
DSC Cable (FUTM4243)
Switch Harness with Charge Cord (FUTM4387)
Padded Aluminum Case with two Keys (not available separately)
Woven Orange Neck Strap (FUTM5693)
One each 1.5mm and 2.5mm Hex Wrenches
CF Memory Card for downloading software updates.
Charging batteries before use
Servos of modeler’s choice, suggested servos for use with the 12Z
include the Futaba S9154 Digital High Speed Servo (FUTM0214) and the Futaba S9255 Hi-Torque Heli Digital Servo (FUTM0225)
Operating System: 2-stick, 12 channels, PCM-G3 synthesizer system
Modulation: PCM-G3, PCM 1024, or FM/PPM switchable
Power Supply: 7.4V FLT2F2200 Li-Ion Battery
Current Drain: 500mA average
Receiving Frequency: US only 72 or 50MHz bands
Intermediate Frequency: 10.7MHz & 450kHz
Power Requirement: 4.8V NiCd battery
Current Drain: 75mA
Size: 2″ x 1.5″ x .65″ (52mm x 37.5mm x 16.5mm)
Weight: 1.16oz (33g)