This is a 90% Prebuilt, Radio Controlled, Glow Powered, Almost-Ready-to-Fly,
Hobbico Hobbistar 60 MKIII .60 Sport Scale All-Wood Airplane.
For Beginner Modeler/Fliers.
Construction: All balsa and plywood
Wings: Two halves join to make a one-piece, all-wood wing
Huge 71″ wingspan improves stabilty and visibility.
Covering: Factory applied adhesive backed (not carried separately)
Colors are Blue and White with Red and Orange stripes.
Radio Compartment: Plywood reinforced, located under the wing.
Landing Gear: Wire tricycle style.
Single Aileron Servo: Mounted in the center of the wing.
Complete hardware package with spinner, wheels, and engine mount.
Building Time: Ready to fly in only 15 – 20 hours.
Warranty Period: 90-days covering defects or workmanship.
Pre-built and covered wings, fuselage and tail assemblies, pushrods,
pre-bent 3/16″ main landing gear, 3/16″ nose gear wire,
2.75″ wheels, metal one-piece engine mount with mounting straps,
14 oz (420cc) fuel tank, 2-3/4″ spinner, wood servo trays and
wing joiners, hardware package and photo-illustrated instructions.
Engine: .61 (10cc) (2-stroke) or .91 (15cc) (4-stroke)
Muffler: Standard (Engine mounts in an upright position)
Radio: 4 Channel
Servos: 4 Standard (1-Aileron, 1-Elevator, 1-Throttle, 1-Rudder)
Servo Extension 6″: 1 (Futaba radios usually include this)
Misc. Items: Glow plug, 1/4″ foam rubber padding, medium fuel tubing,
fuel filter, propeller, building, and field equipment.
Wingspan: 71″ (1805mm)
Wing Area: 888″ (57 dm2)
Wing Chord: 12.5″
Weight: 7-8lb (3175-3629g)
Wing Loading: 18-21 oz/sq ft (55-64 g/dm2)
Length: 55″ (1400mm)
Width- 3 3/8″
Airfoil: Semi-Symmetrical, High-Wing
Center of Gravity: 3″ Back from the wing’s leading edge
at the fuselage sides.
Ailerons: Up & Down 3/8″ (11mm)
Elevator: Up & Down 1/2″ (13mm)
Rudder: Right & Left 1″ (26mm)
If a replacement fuel tank is needed, order the Sullivan 14oz
tank (SULQ1742), or the DuBro 14oz tank (DUBQ0214).
Some minor trimming and modifications may be required.